⟁ Maine Well Data field records · 2026 survey

Maine Well Data › Oxford County › Buckfield (04220)

Buckfield, ME (04220): well depth, water level & drilling cost

✓ 174 Maine Geological Survey records · Oxford County

330 ftmedian well depth
260 ft–420 fttypical depth range
15 ftmedian static water level
5 gpmmedian yield (171 tests)

Pull every recorded well near a Buckfield (04220) address — $49

How deep are wells in and around Buckfield (04220), Maine?

The median drilled well depth in and around Buckfield (04220) is 330 ft, based on 174 wells with recorded depths in the state Maine Geological Survey database. Half fall between 260 ft and 420 ft; 90% are shallower than 527 ft.

How much does it cost to drill a well in and around Buckfield (04220)?

Applying published per-foot rates to the local median depth of 330 ft: drilling and casing alone typically runs $8,250–$21,450; a complete system including pump, pressure tank, and hookup typically runs $19,800–$33,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Buckfield (04220)?

The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–20 ft), from 11 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 3 100–150 ft 5 150–200 ft 10 200–300 ft 43 300–400 ft 44 400–600 ft 57 600+ ft 12
Looking at a specific property in Buckfield (04220)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Buckfield (04220)

Free. Goes to licensed drillers working Oxford County.

Part of Oxford County well records.

Method: medians computed from Maine Geological Survey records (Maine Geological Survey well database, excluding test, observation and monitoring wells; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.