Maine Well Data › Androscoggin County › Danville (04223)
Danville, ME (04223): well depth, water level & drilling cost
✓ 418 Maine Geological Survey records · Androscoggin County
Pull every recorded well near a Danville (04223) address — $49
How deep are wells in and around Danville (04223), Maine?
The median drilled well depth in and around Danville (04223) is 290 ft, based on 415 wells with recorded depths in the state Maine Geological Survey database. Half fall between 193 ft and 400 ft; 90% are shallower than 505 ft.
How much does it cost to drill a well in and around Danville (04223)?
Applying published per-foot rates to the local median depth of 290 ft: drilling and casing alone typically runs $7,250–$18,850; a complete system including pump, pressure tank, and hookup typically runs $17,400–$29,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Danville (04223)?
The median static water level is 20 ft below ground surface (middle half of wells: 15 ft–35 ft), from 59 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Androscoggin County.
Part of Androscoggin County well records.
Method: medians computed from Maine Geological Survey records (Maine Geological Survey well database, excluding test, observation and monitoring wells; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.