Maine Well Data › Washington County › Dennysville (04628)
Dennysville, ME (04628): well depth, water level & drilling cost
✓ 107 Maine Geological Survey records · Washington County
Pull every recorded well near a Dennysville (04628) address — $49
How deep are wells in and around Dennysville (04628), Maine?
The median drilled well depth in and around Dennysville (04628) is 200 ft, based on 107 wells with recorded depths in the state Maine Geological Survey database. Half fall between 120 ft and 310 ft; 90% are shallower than 391 ft.
How much does it cost to drill a well in and around Dennysville (04628)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Dennysville (04628)?
The median static water level is 20 ft below ground surface (middle half of wells: 8 ft–22 ft), from 5 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from Maine Geological Survey records (Maine Geological Survey well database, excluding test, observation and monitoring wells; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.