⟁ Maine Well Data field records · 2026 survey

Maine Well Data › Franklin County › Phillips (04966)

Phillips, ME (04966): well depth, water level & drilling cost

✓ 166 Maine Geological Survey records · Franklin County

280 ftmedian well depth
220 ft–356 fttypical depth range
18 ftmedian static water level
5 gpmmedian yield (158 tests)

Pull every recorded well near a Phillips (04966) address — $49

How deep are wells in and around Phillips (04966), Maine?

The median drilled well depth in and around Phillips (04966) is 280 ft, based on 166 wells with recorded depths in the state Maine Geological Survey database. Half fall between 220 ft and 356 ft; 90% are shallower than 425 ft.

How much does it cost to drill a well in and around Phillips (04966)?

Applying published per-foot rates to the local median depth of 280 ft: drilling and casing alone typically runs $7,000–$18,200; a complete system including pump, pressure tank, and hookup typically runs $16,800–$28,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Phillips (04966)?

The median static water level is 18 ft below ground surface (middle half of wells: 12 ft–24 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 2 100–150 ft 6 150–200 ft 16 200–300 ft 63 300–400 ft 44 400–600 ft 32 600+ ft 2
Looking at a specific property in Phillips (04966)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Phillips (04966)

Free. Goes to licensed drillers working Franklin County.

Part of Franklin County well records.

Method: medians computed from Maine Geological Survey records (Maine Geological Survey well database, excluding test, observation and monitoring wells; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.